Open Channel Flow meter
Basic Principle
Open Channel flow meters measure level, flow rate and total volume of water flowing through weirs, flumes, channels and partially filled pipes. The flow meters use a non-contact level sensor to detect the water level and then calculate the flow rate and volume using the Manning equation and characteristics of the channel.
AFT96 & AIULS Flow totalizer & Sensor is use to measure Total Flow Consumption & Current Flow of Open Channel Liquid Flow Measurement. AFT96 is 16 Bit Microcontroller Based Instrument which have Universal input 4-20mA & Pulse. AFT96 also Can Measure Open Channel Flow measurement for any Parshall Flumes or Weir.
- Simple Programmable By Selecting Type Of Channel
- 2 nos. Relay Output.
- Temperature Compensation.
- Total Flow & Current Flow on same Screen.
- Low Cost
- Local Level Sensor Display For Cross Verification & calibration.
| Power | 90-260VAC @ 50Hz | |
| Display | LCD | |
| Measuring Method | Radar Level | |
| Accuracy | +/- 1mm or 0.2% FS | |
| Output | 2 nos. Relay 3A 1 CO | |
| Analogue Output | 4-20mA | |
| Communication | RS485 Modbus RTU | |
| Wire Less Output
[Optional] |
GPRS | |
| Radio Frequency | ||
| Zig bee | ||
| Blue tooth | ||
| Wifi | ||
| Operation Temperature | -40 ‘C to 70’C | |
| Sensor MOC | Poly Propylene | |
| Display Enclosure | ABS / Weather Proof / Flame Proof | |
| Sensor Range | 0-10 meter [Scalable] | |
■ Permanent and portable sewer monitoring programs
■ Wastewater treatment plants
■ Industrial process measurement
■ Irrigation channels
■ Effluent flow measurement
■ Spill monitoring
■ Combined Sewer Overflows (CSO)
■ Sanitary Sewer Overflows (SSO)
■ Event Duration Monitoring (EDM)